50% OFF on all chimney, hob & gas stove services · Call 93477 37176
AS Chimney Services
Hyderabad

Kitchen Chimney Cleaning, Repair & Installation in Hyderabad

Doorstep chimney cleaning, deep cleaning, repair, installation and dismantling, plus gas hob, gas stove and cooking range service. Tell us your appliance, the problem and your locality. We arrange a visit to your home and explain the charges before any work starts.

  • Service at your home across Hyderabad and Secunderabad
  • Charges explained before work starts
  • Parts fitted only with your approval
Filters degreasedSuction tested

Kitchen chimney services

Pick the service that matches your problem. Each page explains what the work covers, what it does not, and how the visit runs.

Chimney cleaning

Filters washed and degreased, the oil collector emptied and the hood cleaned inside and out, so the chimney draws smoke properly again.

Chimney deep cleaning

For heavy grease or weak suction. The chimney is opened, where its design allows, so the blower, fan and inner hood are cleaned as well.

Chimney repair

Weak suction, a humming or noisy motor, vibration, dead buttons or lights. Tested at your home, with the cause and cost explained first.

Chimney installation

Mounted at the height your manual gives, the duct routed to the outside opening, then power, speeds and suction checked.

Dismantling and shifting

Taking a chimney down for kitchen renovation, replacement or a house move, and fitting it again in the new place.

Servicing and maintenance

A routine check and clean that keeps suction strong and catches worn parts before they stop the chimney.

Hob, gas stove and cooking range service

The same visit can cover your hob or stove. Mention every appliance when you book so the visit is planned for all of them.

More services: gas stove repair · gas hob repair · hob installation · chimney filter cleaning and replacement · chimney hole drilling · commercial kitchen chimney cleaning

Common chimney problems and what they usually point to

If washing the filters brings suction back, the chimney needed cleaning. If suction stays weak with clean filters, or the chimney is noisy, will not start or its buttons do not respond, it needs a repair check.

What you noticeCommon causesUsually start with
Weak suction, smoke stays in the kitchenGrease-clogged filters; a blocked, kinked or very long duct; a fan or motor slowing downCleaning, then a repair check if it does not improve
Chimney does not switch onNo power at the socket or a tripped MCB; a loose plug; a faulty switch panel, control board or internal wiringCheck the socket and MCB, then a repair check
Oil dripping onto the hobA full oil collector cup; saturated filters; grease built up inside the hoodCleaning. More on why a chimney drips oil
Loud humming or grindingGrease on the fan, worn motor bearings or a weak capacitorDeep cleaning or a repair check. More on what chimney noises mean
Vibration or rattlingGrease throwing the fan off balance; loose mounting or panel screws; a loose ductDeep cleaning or a repair check
Buttons or touch panel not respondingGrease or moisture on the panel; a faulty switch or control boardRepair check
Lights not workingA failed bulb or LED strip; a loose connectionRepair check
Filters clog again within daysHeavy frying and tadka; filters already saturated; running the chimney on a low speed while cookingCleaning, plus advice on filter care

This table lists common causes, not a diagnosis. The technician confirms the actual fault at your home before quoting. More detail: chimney repair and why chimney suction gets weak.

How a booking works

The same six steps for every appliance.

  1. Contact usCall, WhatsApp or fill in the booking form.
  2. Share the detailsAppliance type, brand and model if you know it, the problem, and a photo or short video if you can.
  3. Confirm the visitWe confirm your locality and a visit time that suits you.
  4. Inspection and quoteThe technician checks the appliance at your home and tells you the work needed and the charge.
  5. You approveWork starts only after you agree. Any part needed is quoted separately.
  6. Work and testingThe job is done and the appliance is tested: suction, speeds, lights and controls, or the burner flame.

Basic cleaning or deep cleaning?

Basic cleaning covers the parts that can be reached without opening the chimney: filters, oil collector and the hood surfaces. Deep cleaning also opens the chimney, where its design allows, to clean the blower, fan and inner hood. That is usually what brings back suction lost to heavy grease.

Part of the chimneyBasic cleaningDeep cleaning
Filters (baffle or mesh)Washed and degreasedWashed and degreased
Oil collector cupEmptied and cleanedEmptied and cleaned
Outer hood and control panelDegreased and wipedDegreased and wiped
Inside of the hoodAreas reachable with the filters outCleaned after opening the chimney
Blower, fan and motor housingNot openedOpened and cleaned where the design allows
SuitsRegular upkeep and light greaseHeavy grease, weak suction, a noisy greasy fan

What affects the charge

  • Basic or deep cleaning
  • How much grease has built up, and when it was last cleaned
  • Chimney type: wall-mounted, island or built-in
  • Filter type: baffle, mesh or filterless
  • For repairs, the fault and any part needed

Before work starts

What a visit covers can vary with the chimney model, so we confirm exactly what your visit includes and the charge before starting. Prices are not listed on this site because a lightly used chimney and one left uncleaned for a year are very different jobs. See how our charges work.

Full details on chimney cleaning

How we work

Kitchen appliances only

Chimneys, hobs, gas stoves and cooking ranges are the appliances we work on.

At your home

The technician comes to you. There is no workshop to carry a chimney to.

Charges before work

You are told what the job involves and what it costs before work starts.

Your say on parts

If a part is needed, you get its cost first and decide whether to go ahead.

One number

Call or WhatsApp +91 93477 37176 for chimney, hob, stove and cooking range work.

Photos help

Send a photo of the chimney and its model sticker on WhatsApp so the technician comes prepared.

Multi-brand chimney service

Brands We Service

Repair, deep cleaning, motor and filter replacement and installation for all major kitchen chimney brands in Hyderabad.

We service kitchen chimneys from Faber, Elica, Hindware, Glen, Gilma, Instohot, Sunflame, Kaff, Bosch, Siemens, Prestige, Inalsa, Carysil, Kutchina, Häfele, IFB, Pigeon plus Havells and Crompton, across Hyderabad, Secunderabad and Cyberabad.

See all brands we service

Brand names and logos are trademarks of their respective owners and are shown only to indicate the brands we service. We are an independent service provider, not an authorised service centre of these brands.

Chimney and hob brands

We are an independent service provider. We are not an authorised service centre for any chimney, hob or stove brand. When you book, tell us the brand and model; it is usually on a sticker inside the hood behind the filters, or on your purchase bill. We will tell you whether we can take the job on.

If your appliance is still under the manufacturer’s warranty, contact the brand’s own service first. Work done by an outside technician can affect a manufacturer warranty.

Areas we cover

We come to homes across Hyderabad and Secunderabad, including:

Not on the list? See service areas, or WhatsApp your locality and we will tell you whether we can come.

Questions people ask before booking

How often should a kitchen chimney be cleaned?

For daily Indian cooking with frying and tadka, wash the filters every two to three weeks and get a professional cleaning roughly every three to six months. Homes that cook lightly can go longer. If your chimney’s manual gives an interval, follow that. Read the full guide.

What is the difference between basic and deep chimney cleaning?

Basic cleaning covers the filters, oil collector and hood surfaces. Deep cleaning also opens the chimney, where the design allows, to clean the blower, fan and inner hood. Deep cleaning suits chimneys with heavy grease, weak suction or a noisy fan.

How much does chimney cleaning or repair cost in Hyderabad?

It depends on the service, the chimney type and how much grease or damage there is, so we quote for your chimney instead of listing one price. You get the charge before work starts, and any part is quoted separately and fitted only if you agree. Before anyone travels, you get a probable cause, a price range and the visit charge, which covers travel to your home. If you go ahead with the work, the visit charge is adjusted into the bill.

Does an auto-clean chimney still need servicing?

Yes. Auto-clean loosens oil from the inner parts and drains it into a collector cup, but it does not clean the filters, the duct or the outside of the hood, and the cup needs emptying. A periodic professional cleaning still helps keep suction strong. More on what to do when auto-clean stops working.

Are you an authorised service centre for Faber, Elica or other brands?

No. We are an independent service provider and are not authorised by any appliance brand. If your appliance is under the manufacturer’s warranty, contact the brand first.

What should I tell you when I book?

Your appliance type, the brand and model if you know it, the problem and your locality. A photo of the chimney and a short video of the noise or weak suction helps the technician come prepared.

Which areas of Hyderabad do you cover?

We visit homes across Hyderabad and Secunderabad, including Gachibowli, Kondapur, Madhapur, Kukatpally, Miyapur, Banjara Hills, Jubilee Hills, Uppal and LB Nagar. If your locality is not listed, WhatsApp it to us and we will confirm.

What should I do if I smell gas in the kitchen?

Do not switch any lights or appliances on or off. Close the cylinder regulator or the gas supply valve, put out any flame, open the doors and windows and leave the kitchen. Then call your gas provider’s emergency number; for LPG in India it is 1906. Do not use the hob or stove until it has been checked.

Request a visit

Fill this in and WhatsApp opens with your details ready to send. Prefer to talk? Call +91 93477 37176.

10-digit Indian mobile number.

For example: suction is weak, motor is noisy, chimney does not switch on, burner flame is uneven.

How should we contact you?

Pressing the button opens WhatsApp with these details typed in. This website does not send or store your enquiry; it reaches us only when you press Send in WhatsApp. We use your details only to reply to you. Privacy policy.