Gilma Chimney Service in Hyderabad
Repair, deep cleaning and installation for Gilma kitchen chimneys — the Aries, Barbie, Pearl, Eva and Bruno hoods, auto-clean models and older filter units — at your home across Hyderabad and Secunderabad.
We are an independent appliance repair business servicing Gilma kitchen chimneys at home in Hyderabad. We handle deep cleaning, filter and oil channel work, motor and switch faults, auto-clean problems and new installation. Gilma sells mainly through its own showrooms across South India, which affects how you get parts and warranty service, so it is worth reading the warranty section below before you book anyone.
- Brand
- Gilma, a kitchen appliance brand selling chimneys, hobs and cooktops in India
- Distribution
- Largely through exclusive Gilma showrooms across South India rather than general retail
- Hood types serviced
- Auto clean and filter models, wall mounted
- Sizes
- Mostly 60 cm, with 90 cm on models such as the Bruno
- Published specifications
- Gilma does not publish suction or filter figures for most models on retail listings
- What this means
- We work from the rating sticker on your hood rather than a published sheet
- Languages
- English, Hindi, Telugu
What we service on a Gilma chimney
- Deep cleaning of the filter or cone, impeller, housing, oil channel and collector
- Filter cleaning and replacement, with clip and spring repair
- Motor faults: bearing noise, weak pull, humming without spin, failed capacitors
- Switch and control faults, the usual cause of a dead speed
- Auto-clean faults on the Aries Maxx and Barbie models
- Oil collector and channel problems
- Lamp and lamp-holder replacement
- Installation, re-siting during a kitchen change and duct re-routing
Related: chimney cleaning, chimney repair and chimney installation.
A showroom brand, which changes the parts question
Gilma sells largely through its own exclusive showrooms rather than through electronics chains, and it publishes very little technical detail online. Most of its models have no suction figure or filter type listed on any retail site.
For a repair that has two consequences. First, we work from the rating sticker on your hood rather than a published specification, so a photo of it matters more with Gilma than with any other brand. Second, model-specific parts such as glass panels usually have to come through a Gilma showroom, so for those we will often point you there rather than pretend we can source them quickly.
Common Gilma chimney problems
These are the Gilma complaints we attend to most often in Hyderabad. The hoods are mechanically straightforward, so most faults have inexpensive fixes.
| Symptom | Most likely cause | What we do | Typical time |
|---|---|---|---|
| Suction dropped | Filter and the channel behind it clogged with hardened oil, or a blocked duct mouth | Strip and degrease the filter, channel, impeller and duct mouth | 60–100 min |
| Oil dripping onto the hob | Collector full or misseated, or the oil channel is choked | Clear and reseat the collector, flush the channel, renew a hardened gasket | 45–75 min |
| One speed not working | A failed switch rather than a control board on most Gilma models | Test and replace the switch, which is an inexpensive part | 30–60 min |
| Chimney hums but the fan does not turn | Failed run capacitor or a seized bearing | Test and swap the capacitor first; replace the bearing or motor if needed | 60–150 min |
| Auto clean runs but the hood stays greasy | Heating or oil-release element failed, or the cycle is run far too rarely | Test the element, replace it where obtainable, degrease the hood by hand | 60–120 min |
| Rattling or droning at high speed | Impeller unbalanced by uneven oil, or a loose canopy fixing | Clean and re-balance the impeller, re-seat and tighten the canopy | 60–120 min |
| Lamp not working | Failed lamp or a corroded lamp holder | Replace the lamp and holder, and check the wiring for oil ingress | 20–45 min |
Times are for one technician at your home and exclude waiting for a spare part that has to be ordered through a Gilma showroom.
Gilma chimney models we service
Gilma chimneys sold in India, including the models below. Gilma does not publish suction or filter figures for most of these on retail listings, and we have left those cells honest rather than filling them with guesses. Your unit’s specification is on the rating sticker inside the hood.
| Model | Width | Suction | Cleaning |
|---|---|---|---|
| Gilma Bruno 90 | 90 cm | Not published | Per Gilma listing |
| Gilma Aries 60 Maxx | 60 cm | Not published | Auto clean |
| Gilma Barbie 60 | 60 cm | Not published | Auto clean |
| Gilma Aries 60 | 60 cm | Not published | Per Gilma listing |
| Gilma Pearl 60 | 60 cm | Not published | Per Gilma listing |
| Gilma Eva 60 SS | 60 cm | Not published | Stainless steel finish |
Gilma publishes less technical detail than any other brand on this site. Rather than invent figures, we read your hood. Send a photo of the rating sticker and we will tell you the suction, filter type and motor rating before the visit. Models not listed here are still serviced.
What to tell us about your Gilma hood
Because Gilma publishes so little online, the details below do more to get your repair right than any model name would. Reading them off the hood takes two minutes and usually means we arrive with the correct part.
| What to check | Where to find it | Why it matters for a repair |
|---|---|---|
| Model name and number | Rating sticker inside the hood, under the canopy or near the duct outlet | Identifies the canopy, glass and bracket we need to carry |
| Motor wattage and voltage | Same sticker, usually stated in watts | Determines which replacement motor or capacitor will match |
| Filter type | Look under the hood: removable metal plates mean baffle, a smooth cone means filterless | Changes the cleaning method, the time taken and the price |
| Auto clean or not | A dedicated button on the control panel | Tells us whether to expect a heating element inside |
| Control type | Push buttons, a rocker switch or a touch panel | A dead speed on buttons is a switch; on a touch panel it is a board repair |
| Body material | Stainless steel, painted steel or glass front | Decides which degreasers we can safely use without damaging the finish |
| Where you bought it | Your invoice, usually a Gilma showroom | That showroom is normally the route for warranty claims and model-specific parts |
A single photograph of the rating sticker covers most of this. It is the most useful thing you can send us about a Gilma hood.
Gilma warranty, and where to claim it
Gilma does not publish warranty terms for its chimney range on retail listings, and we are not going to quote you a figure we cannot verify. Read your own invoice.
Because Gilma sells mainly through exclusive showrooms across South India, that showroom is normally the fastest route to both a warranty claim and a model-specific part. If your hood is young, start there rather than with us. We will tell you when a job looks like a warranty claim.
For Hyderabad customers this is usually straightforward, since Gilma’s showroom network covers South India well.
What we handle
Deep cleaning, which no brand covers under warranty at any age. Beyond that: filter and oil channel work, clips and springs, switches, capacitors, bearings, oil collectors, lamps and holders, ducting, installation and re-siting, and any hood past its cover.
Parts are the honest limitation. Universal components — motors, capacitors, switches, lamps, baffle plates — we source and fit without difficulty. Gilma-specific glass panels and canopy trims generally have to come through a Gilma showroom, and we will say so rather than keep your kitchen waiting on a part we cannot get.
Sources: Gilma and Indian retailer price listings.
How a Gilma service visit works
- You send the symptom. Call or send a short video of the chimney running. Sound and smoke tell us more than a description, and it lets us carry the right spare on the first visit.
- We tell you what it is likely to be. You get a probable cause and a price range before anyone travels, along with the visit charge. A photo of the rating sticker matters more on a Gilma than on any other brand, because so little is published online.
- On-site diagnosis. The technician opens the hood, checks suction at the canopy, inspects the oil channel, duct and flap, then shows you the fault before quoting.
- Repair or deep clean. Work is done at your home. Floors and the hob are covered, oil-soaked parts are degreased in a tray, and old parts are handed to you.
- Test and hand over. We run every speed, check noise and suction with the kitchen door shut, clean the work area and give you a dated bill.
Full detail on charges is on the service charges page, and the areas we cover are listed under service areas.
Gilma chimney questions
Why can I not find specifications for my Gilma chimney online?
Because Gilma publishes very little. It sells mainly through its own exclusive showrooms rather than electronics chains, and most of its models have no suction figure or filter type listed on any retail site. That is not a sign of a poor hood, just a different way of selling. For a repair we read the rating sticker on your hood instead, which is why a photo of it is the single most useful thing you can send us.
How long is the Gilma chimney warranty?
Gilma does not publish warranty terms for its chimney range on retail listings, so we will not quote you a number we cannot verify. Read your own invoice. Because Gilma sells through its own showrooms, the showroom you bought from is normally the fastest route to a warranty claim.
Can you get Gilma spare parts?
Partly, and we will be straight with you about which. Universal components such as motors, capacitors, switches, lamps and baffle plates we source and fit without difficulty. Gilma-specific glass panels and canopy trims generally have to come through a Gilma showroom. If your repair needs one of those, we will tell you rather than leave your kitchen waiting on a part we cannot obtain.
Is a Gilma chimney worth repairing?
Usually yes. The hoods are mechanically straightforward, so the common faults — a dead speed, a humming motor, lost suction, a dripping collector — are switches, capacitors and cleaning rather than expensive assemblies. Where a repair would need a part only a showroom can supply, we will tell you what that is likely to cost before you commit.
Does Gilma auto clean replace a deep clean?
No, and this is true of every brand. An auto-clean cycle loosens grease and moves it towards the collector. It does not clean the filter or cone, the impeller blades, the motor housing or the duct, and those are the surfaces that cost you suction. A hand strip-down every four to six months keeps the pull where it started.
How do I tell whether my Gilma is filterless or has filters?
Look up into the hood. If you can see removable metal plates that unclip, you have a baffle-filter model and those plates can be washed at home. If the underside is a smooth cone with no plates, it is filterless and the cone needs stripping by hand. The difference changes the cleaning time and the price, so tell us which you see when you call.
Do you service Gilma hobs and cooktops too?
Yes. Gilma sells hobs and cooktops alongside its chimneys, and we service gas hobs, gas stoves and cooking ranges as well. See hob service, gas stove service and cooking range service.
Which areas do you cover?
Hyderabad and Secunderabad, including Gachibowli, Kondapur, Madhapur, Kukatpally, Miyapur, Nizampet, Bachupally, Manikonda, Banjara Hills, Jubilee Hills, Mehdipatnam, Attapur, Uppal and LB Nagar. The full list is on the service areas page.
Independent service notice. AS Chimney Services Hyderabad is an independent appliance repair business. We are not an authorised service centre of Gilma and we are not affiliated with or endorsed by Gilma. The name Gilma and its logo are trademarks of their owner, used here only to describe the appliances we repair. For in-warranty claims, contact Gilma directly.