Chimney Spare Parts and Accessories in Hyderabad
Every part used in a kitchen chimney, from filters and motors to duct pipes and fittings, plus hob and gas stove parts, supplied and fitted at your home. We also drill the hole for the chimney duct. Across Hyderabad and Secunderabad.
We supply and fit every part used in a kitchen chimney, plus gas hob and gas stove parts, at your home in Hyderabad and Secunderabad. That covers filters, motors, blower wheels, electrical and auto-clean parts, oil collectors, duct pipes and fittings, and hob and stove burners, knobs and ignition parts. We also drill or core-cut the wall hole for the duct. Every part is fitted by our technician during a visit, so it is matched to your model and tested before we leave.
- What we supply
- Every part used in a kitchen chimney, plus hob and gas stove parts
- Also
- Duct hole drilling and core cutting for the chimney pipe
- How you get them
- Supplied and fitted at your home by our technician
- Counter sale or courier
- No, every part is fitted during a home visit
- Original or compatible
- Original brand parts where available; otherwise a compatible part, and we tell you first
- Brands
- Faber, Elica, Hindware, Glen, Kaff, Sunflame, Bosch, Siemens and other brands
- Area
- Hyderabad and Secunderabad
- Hours
- Monday to Sunday, 8 am to 10 pm
Accessories and spare parts we supply and fit
We supply every part used in a kitchen chimney. These are the ones customers ask for most. For anything not listed, send us a photo of the part and the model sticker.
| Category | Parts | When it is usually needed |
|---|---|---|
| Chimney filters | Baffle, mesh and charcoal filters, filter locks and handles | Filters bent, rusted, torn or used up, or charcoal filters due in a ductless hood |
| Motor and electrical parts | Motors, capacitors, switches, control panels and lamps | Motor humming without spinning, weak suction, a dead speed or a light that will not work |
| Oil collection | Oil cups and oil collectors | A cracked, missing or leaking collector, or oil dripping from the hood |
| Blower and body parts | Blower wheels (impellers), fan housings, mounting brackets and screws, glass panels and trims | Noise or vibration from a damaged blower, a loose or sagging hood, or broken glass |
| Auto-clean and control parts | Heating elements, circuit boards, sensors, touch panels and remotes | Auto-clean not working, an unresponsive touch panel or a faulty sensor |
| Duct pipes and fittings | Duct pipe, bends, wall collars and cowls | New installation, house shifting, or a torn or leaking duct |
| Hob and gas stove parts | Burners, burner caps, knobs, ignition parts and pan supports | Uneven or yellow flame, a broken knob, no spark, or a wobbly pan support |
| Duct hole drilling | Wall hole drilled or core-cut through brick or concrete for the duct pipe | New installation, or moving the chimney to a new wall. See hole drilling and core cutting |
Part availability depends on the brand and model. We confirm the part before the visit wherever we can.
Why we fit parts rather than just selling them
A chimney filter that is a few millimetres off will rattle or leak oil, and a capacitor of the wrong rating can burn out a motor. Fitting the part at your home lets us check the size, lock and rating against your appliance, then run it on every speed before we leave. That is why we do not sell parts over the counter or by courier.
If an existing part can be cleaned or repaired instead of replaced, we tell you. See filter cleaning and replacement and chimney motor repair.
Original or compatible parts
We fit the original brand part where it is available. For older or discontinued models, a compatible part of the same size and rating is often the practical option. We tell you which one you are getting before we fit it, and you decide.
How a parts replacement visit works
- You send the details. Call or WhatsApp the brand, the model sticker and a photo or short video of the problem or the damaged part.
- We identify the part. We tell you which part is likely needed and whether an original or compatible part is available.
- We fix a time. We visit Monday to Sunday, 8 am to 10 pm, across Hyderabad and Secunderabad. See our service areas.
- We confirm at home. The technician checks the old part and the fit, and gives you a quote before any work starts.
- We fit the part you approve. The new part is fitted and the old one is shown to you.
- We test it with you. We run every speed, the light or the burners, and check for leaks, rattles and smoke escape.
What to tell us before the visit
- The brand and the model from the sticker inside the hood or under the hob
- For filters, the width and depth of the old filter, or a photo with a tape measure
- A photo of the damaged part, or a short video with the appliance running
- For duct work, where the pipe leaves the kitchen and roughly how long it runs
What decides the charge
The charge depends on the part, whether it is original or compatible, and the time needed to fit it. You get a quote after inspection and before any work starts. See our service charges page for how pricing works.
Chimney spare parts and accessories questions
Do you sell chimney spare parts in Hyderabad?
Yes. We supply chimney filters, motors, capacitors, switches, control panels, lamps, oil collectors and duct fittings, and fit them at your home across Hyderabad and Secunderabad.
Can I buy just a filter without a visit?
No. Every part is fitted during a home visit so that the size, lock and fit match your chimney. We do not sell parts over the counter or by courier.
Do you fit original brand parts?
We fit the original part where it is available. For older or discontinued models we may offer a compatible part of the same size and rating, and we always tell you before fitting it.
Which brands do you supply parts for?
Most kitchen chimney and hob brands sold in Hyderabad, including Faber, Elica, Hindware, Glen, Kaff, Sunflame, Bosch and Siemens. See our chimney brands page.
How do I know which part I need?
Send us the model sticker and a photo or short video of the problem on WhatsApp. The sound and symptoms usually tell us whether it is a filter, a capacitor, a switch or the motor itself.
Do you supply duct pipes for a new chimney?
Yes. We supply and fit the duct pipe, bends, wall collar and cowl as part of an installation. See chimney installation, duct installation and hole drilling.
Do you also drill the hole for the chimney duct?
Yes. We drill or core-cut the wall hole for the duct pipe and fit the wall collar and cowl. See chimney hole drilling and core cutting.
Do you replace hob and gas stove burners and knobs?
Yes. We fit burners, burner caps, knobs, ignition parts and pan supports. See gas hob repair and gas stove repair.